Safety Insulin Pen Needle

• Minimised needlestick injury risk with safety jacket design
• Reduces cross-contamination — single-use only
• Complies with safety and medical device regulations
• Simple twist-on attachment, compatible with most insulin pens

Gauge & Depth options:
• 30G – 5mm / 8mm
• 31G – 4mm / 6mm / 8mm
• 32G – 4mm

1. Take the sealing paper off the pen needle.
2. Attach the pen needle to the insulin pen, making sure it is on straight.
3. Remove the needle container.
4. Prime the insulin pen according to the pen instructions for use. Check the flow. A drop of liquid should appear at the needle tip. Please note that a priming droplet may remain and be left on the skin after injection.
5. Select the dose prescribed by your healthcare professional.
6. Push the needle protective jacket against taut skin (at a 90° angle) following the injection technique demonstrated by your healthcare professional. The protective jacket will retract and allow the needle to penetrate the skin. To ensure a firmer surface at the injection site, pinch up the skin to create a skinfold.
7. Do not change the direction of the needle when it is still in the skin to avoid bending.
8. After the injection, hold the needle in place for 10 seconds and then withdraw the needle from the skin.
9. Upon withdrawal from the skin, the protective jacket will lock, and the red indicator will confirm that the safety mechanism has been activated and the needle cannot be used again.
10. Discard the needle into a sharp container.